L & K Engineering Co (6139.TW) Osake Kurssi
L & K Engineering Co Kurssi
Over the last 19 years L & K Engineering Co grew revenue by 14,8% annually, reaching 77,48 Mrd. TWD. Earnings per share have grown at 16,1% per year over the last 15 years. For L & K Engineering Co, the net margin of 9,2% is up versus 1,4% a few years ago. At today's price the dividend yield works out to roughly 1,82%. The payout ratio is around 46% of earnings. The dividend has grown at 6,5% per year over the past 19 years. The consensus 12-month price target for L & K Engineering Co is 316,20 TWD, about 58,5% below where the stock trades today. Of 8 analysts, 7 rate the stock a buy — an overall Buy consensus. The stock trades about 118% above its 52-week low.
L & K Engineering Co osakekurssi
Tiedot
Osakekurssi
ⓘKuinka lukea tätä kaaviota
Tämä kaavio seuraa L & K Engineering Co:n historiallista osakekurssia ajan kuluessa. Voit vaihtaa päivä-, viikko- ja kuukausilähtöisten näkymien välillä ja valita mukautettuja aikavälejä — yhdestä päivästä saatavilla olevaan koko historiaan. Käytä vaihtoehtoa nähdäksesi hinnanmuutokset absoluuttisissa valuuttayksiköissä tai prosentuaalisena muutoksena suhteessa aloituspäivään.
Kokonaistuotto vs. hinnantuotto
"Kokonaistuotto"-vaihtoehdossa on otettu huomioon uudelleensijoistetut osingot puhtaan hinnanmuutoksen lisäksi. Tämä on kriittistä, koska osingot voivat muodostaa merkittävän osan pitkän aikavälin tuotoista. Historiallisesti noin 40 % S&P 500:n kokonaistuotosta on tullut osingoista. Vertaa aina kokonaistuottoja arvioidessasi osakkeen todellista suorituskykyä vertailuindeksiin nähden.
Päivänsisäiset hintatiedot
Kun katselet yhden päivän aikaväliä, kaavio näyttää reaaliaikaiset päivänsisäiset hinnanmuutokset. Tämä on hyödyllista havainnoinnissa, kuinka L & K Engineering Co:n osake reagoi markkinoiden avautumiseen, tulosreleaseisiin tai uutistarinoihin koko kaupankäyntiistunnon ajan.
Mitä etsiä
Etsi pitkän aikavälin trendejä (kestävät ylös- tai laskusuuntaiset liikkelyt kuukausien ja vuosien aikana), tuki- ja vastustasoja (hintavyöhykkeet, joissa osake toistuvasti palaa tai kääntyy) ja volatiliteettia (kuinka paljon hinta vaihtelee päivittäin). L & K Engineering Co:n hintakaavion vertaaminen markkinaindeksiin, kuten S&P 500:een, voi paljastaa, ylitäyttääkö vai alitäyttääkö osake laajemman markkinan kehitystä.
| Päivämäärä | L & K Engineering Co Osakekurssi |
|---|---|
| 21.8.2026 | 762,00 TWD |
| 20.8.2026 | 766,00 TWD |
| 19.8.2026 | 773,00 TWD |
| 18.8.2026 | 782,00 TWD |
| 17.8.2026 | 800,00 TWD |
| 14.8.2026 | 798,00 TWD |
| 13.8.2026 | 805,00 TWD |
| 12.8.2026 | 820,00 TWD |
| 11.8.2026 | 812,00 TWD |
| 10.8.2026 | 807,00 TWD |
| 7.8.2026 | 802,00 TWD |
| 6.8.2026 | 836,00 TWD |
| 5.8.2026 | 813,00 TWD |
| 4.8.2026 | 786,00 TWD |
| 3.8.2026 | 764,00 TWD |
| 31.7.2026 | 707,00 TWD |
| 30.7.2026 | 643,00 TWD |
| 29.7.2026 | 654,00 TWD |
| 28.7.2026 | 704,00 TWD |
| 27.7.2026 | 762,00 TWD |
| 24.7.2026 | 840,00 TWD |
| 23.7.2026 | 858,00 TWD |
| 22.7.2026 | 844,00 TWD |
| 21.7.2026 | 815,00 TWD |
| 20.7.2026 | 780,00 TWD |
| 17.7.2026 | 799,00 TWD |
| 16.7.2026 | 868,00 TWD |
| 15.7.2026 | 895,00 TWD |
| 14.7.2026 | 834,00 TWD |
| 13.7.2026 | 878,00 TWD |
| 10.7.2026 | 875,00 TWD |
| 9.7.2026 | 875,00 TWD |
| 8.7.2026 | 866,00 TWD |
| 7.7.2026 | 883,00 TWD |
| 6.7.2026 | 932,00 TWD |
| 3.7.2026 | 948,00 TWD |
| 2.7.2026 | 939,00 TWD |
| 1.7.2026 | 912,00 TWD |
| 30.6.2026 | 923,00 TWD |
| 29.6.2026 | 943,00 TWD |
| 26.6.2026 | 878,00 TWD |
| 25.6.2026 | 875,00 TWD |
| 24.6.2026 | 818,00 TWD |
| 23.6.2026 | 791,00 TWD |
| 22.6.2026 | 811,00 TWD |
| 18.6.2026 | 824,00 TWD |
| 17.6.2026 | 815,00 TWD |
| 16.6.2026 | 799,00 TWD |
| 15.6.2026 | 885,00 TWD |
| 12.6.2026 | 805,00 TWD |
| 11.6.2026 | 724,00 TWD |
| 10.6.2026 | 737,00 TWD |
| 9.6.2026 | 749,00 TWD |
| 8.6.2026 | 728,00 TWD |
| 5.6.2026 | 826,00 TWD |
| 4.6.2026 | 827,00 TWD |
| 3.6.2026 | 784,00 TWD |
| 2.6.2026 | 762,00 TWD |
| 1.6.2026 | 779,00 TWD |
| 29.5.2026 | 772,00 TWD |
| 28.5.2026 | 791,00 TWD |
| 27.5.2026 | 830,00 TWD |
| 26.5.2026 | 825,00 TWD |
| 25.5.2026 | 789,00 TWD |
| 22.5.2026 | 784,00 TWD |
| 21.5.2026 | 787,00 TWD |
| 20.5.2026 | 729,00 TWD |
| 19.5.2026 | 738,00 TWD |
| 18.5.2026 | 721,00 TWD |
| 15.5.2026 | 738,00 TWD |
| 14.5.2026 | 720,00 TWD |
| 13.5.2026 | 686,00 TWD |
| 12.5.2026 | 680,00 TWD |
| 11.5.2026 | 679,00 TWD |
| 8.5.2026 | 714,00 TWD |
| 7.5.2026 | 721,00 TWD |
| 6.5.2026 | 715,00 TWD |
| 5.5.2026 | 691,00 TWD |
| 4.5.2026 | 695,00 TWD |
| 30.4.2026 | 670,00 TWD |
| 29.4.2026 | 671,00 TWD |
| 28.4.2026 | 680,00 TWD |
| 27.4.2026 | 666,00 TWD |
| 24.4.2026 | 706,00 TWD |
| 23.4.2026 | 712,00 TWD |
| 22.4.2026 | 721,00 TWD |
| 21.4.2026 | 725,00 TWD |
| 20.4.2026 | 751,00 TWD |
| 17.4.2026 | 723,00 TWD |
| 16.4.2026 | 669,00 TWD |
| 15.4.2026 | 629,00 TWD |
| 14.4.2026 | 635,00 TWD |
| 13.4.2026 | 610,00 TWD |
| 10.4.2026 | 636,00 TWD |
| 9.4.2026 | 605,00 TWD |
| 8.4.2026 | 554,00 TWD |
| 7.4.2026 | 517,00 TWD |
| 2.4.2026 | 521,00 TWD |
| 1.4.2026 | 525,00 TWD |
| 31.3.2026 | 524,00 TWD |
| 30.3.2026 | 545,00 TWD |
| 27.3.2026 | 574,00 TWD |
| 26.3.2026 | 589,00 TWD |
| 25.3.2026 | 654,00 TWD |
| 24.3.2026 | 632,00 TWD |
| 23.3.2026 | 598,00 TWD |
| 20.3.2026 | 593,00 TWD |
| 19.3.2026 | 587,00 TWD |
| 18.3.2026 | 585,00 TWD |
| 17.3.2026 | 580,00 TWD |
| 16.3.2026 | 570,00 TWD |
| 13.3.2026 | 524,00 TWD |
| 12.3.2026 | 521,00 TWD |
| 11.3.2026 | 532,00 TWD |
| 10.3.2026 | 516,00 TWD |
| 9.3.2026 | 500,00 TWD |
| 6.3.2026 | 526,00 TWD |
| 5.3.2026 | 541,00 TWD |
| 4.3.2026 | 504,00 TWD |
| 3.3.2026 | 539,00 TWD |
| 2.3.2026 | 557,00 TWD |
| 26.2.2026 | 585,00 TWD |
| 25.2.2026 | 557,00 TWD |
| 24.2.2026 | 543,00 TWD |
| 23.2.2026 | 542,00 TWD |
| 11.2.2026 | 519,00 TWD |
| 10.2.2026 | 524,00 TWD |
| 9.2.2026 | 524,00 TWD |
| 6.2.2026 | 529,00 TWD |
| 5.2.2026 | 544,00 TWD |
| 4.2.2026 | 556,00 TWD |
| 3.2.2026 | 560,00 TWD |
| 2.2.2026 | 555,00 TWD |
| 30.1.2026 | 575,00 TWD |
| 29.1.2026 | 614,00 TWD |
| 28.1.2026 | 589,00 TWD |
| 27.1.2026 | 545,00 TWD |
| 26.1.2026 | 541,00 TWD |
| 23.1.2026 | 552,00 TWD |
| 22.1.2026 | 558,00 TWD |
| 21.1.2026 | 561,00 TWD |
| 20.1.2026 | 582,00 TWD |
| 19.1.2026 | 592,00 TWD |
| 16.1.2026 | 584,00 TWD |
| 15.1.2026 | 606,00 TWD |
| 14.1.2026 | 610,00 TWD |
| 13.1.2026 | 602,00 TWD |
| 12.1.2026 | 579,00 TWD |
| 9.1.2026 | 601,00 TWD |
| 8.1.2026 | 590,00 TWD |
| 7.1.2026 | 595,00 TWD |
| 6.1.2026 | 603,00 TWD |
| 5.1.2026 | 595,00 TWD |
| 2.1.2026 | 565,00 TWD |
| 31.12.2025 | 552,00 TWD |
| 30.12.2025 | 548,00 TWD |
| 29.12.2025 | 545,00 TWD |
| 26.12.2025 | 589,00 TWD |
| 24.12.2025 | 563,00 TWD |
| 23.12.2025 | 579,00 TWD |
| 22.12.2025 | 566,00 TWD |
| 19.12.2025 | 604,00 TWD |
| 18.12.2025 | 584,00 TWD |
| 17.12.2025 | 589,00 TWD |
| 16.12.2025 | 597,00 TWD |
| 15.12.2025 | 590,00 TWD |
| 12.12.2025 | 559,00 TWD |
| 11.12.2025 | 528,00 TWD |
| 10.12.2025 | 508,00 TWD |
| 9.12.2025 | 491,50 TWD |
| 8.12.2025 | 480,00 TWD |
| 5.12.2025 | 466,00 TWD |
| 4.12.2025 | 457,50 TWD |
| 3.12.2025 | 465,50 TWD |
| 2.12.2025 | 439,50 TWD |
| 1.12.2025 | 440,50 TWD |
| 28.11.2025 | 455,50 TWD |
| 27.11.2025 | 447,00 TWD |
| 26.11.2025 | 449,00 TWD |
| 25.11.2025 | 441,00 TWD |
| 24.11.2025 | 439,50 TWD |
| 21.11.2025 | 435,00 TWD |
| 20.11.2025 | 458,50 TWD |
| 19.11.2025 | 428,50 TWD |
| 18.11.2025 | 414,50 TWD |
| 17.11.2025 | 419,50 TWD |
| 14.11.2025 | 418,50 TWD |
| 13.11.2025 | 415,50 TWD |
| 12.11.2025 | 410,00 TWD |
| 11.11.2025 | 407,00 TWD |
| 10.11.2025 | 431,00 TWD |
| 7.11.2025 | 474,00 TWD |
| 6.11.2025 | 480,00 TWD |
| 5.11.2025 | 469,00 TWD |
| 4.11.2025 | 458,00 TWD |
| 3.11.2025 | 467,00 TWD |
| 31.10.2025 | 478,50 TWD |
| 30.10.2025 | 463,00 TWD |
| 29.10.2025 | 456,50 TWD |
| 28.10.2025 | 438,50 TWD |
| 27.10.2025 | 424,50 TWD |
| 23.10.2025 | 420,50 TWD |
| 22.10.2025 | 430,00 TWD |
| 21.10.2025 | 433,00 TWD |
| 20.10.2025 | 428,00 TWD |
| 17.10.2025 | 429,00 TWD |
| 16.10.2025 | 454,00 TWD |
| 15.10.2025 | 451,00 TWD |
| 14.10.2025 | 410,00 TWD |
| 13.10.2025 | 424,00 TWD |
| 9.10.2025 | 433,50 TWD |
| 8.10.2025 | 398,50 TWD |
| 7.10.2025 | 390,50 TWD |
| 3.10.2025 | 378,50 TWD |
| 2.10.2025 | 377,00 TWD |
| 1.10.2025 | 370,00 TWD |
| 30.9.2025 | 359,00 TWD |
| 26.9.2025 | 349,00 TWD |
| 25.9.2025 | 358,50 TWD |
| 24.9.2025 | 362,00 TWD |
| 23.9.2025 | 358,50 TWD |
| 22.9.2025 | 355,50 TWD |
| 19.9.2025 | 355,00 TWD |
| 18.9.2025 | 355,00 TWD |
| 17.9.2025 | 353,00 TWD |
| 16.9.2025 | 367,00 TWD |
| 15.9.2025 | 360,50 TWD |
| 12.9.2025 | 370,50 TWD |
| 11.9.2025 | 387,00 TWD |
| 10.9.2025 | 368,00 TWD |
| 9.9.2025 | 371,00 TWD |
| 8.9.2025 | 366,50 TWD |
| 5.9.2025 | 361,00 TWD |
| 4.9.2025 | 353,00 TWD |
| 3.9.2025 | 370,50 TWD |
| 2.9.2025 | 367,00 TWD |
| 1.9.2025 | 378,50 TWD |
| 29.8.2025 | 353,00 TWD |
| 28.8.2025 | 349,50 TWD |
| 27.8.2025 | 359,00 TWD |
L & K Engineering Co osakkeen liikevaihto, EBIT, voitto
3 vuotta
5 vuotta
10 vuotta
25 vuotta
Maksimi
Details
L & K Engineering Co Tuloslaskelma, tase, rahavirtalaskelma
| LIIKEVAIHTOMrd. TWD |
|---|
| LIIKEVAIHDON KASVU% |
| BRUTTOKATE% |
| BRUTTOTULOMrd. TWD |
| EBITMrd. TWD |
| EBIT-MARGINAALI% |
| NETTOTULOMrd. TWD |
| NETTOTULOKSEN KASVU% |
| OSINKOOSINK.TWD |
| OSINGON KASVUOSINKO KASVU% |
| OSAKKEETM |
| 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | 2026e | 2027e |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 12,61 | 12,27 | 14,50 | 17,50 | 23,47 | 21,19 | 22,24 | 16,59 | 13,92 | 23,75 | 35,74 | 56,90 | 65,09 | 77,48 | 138,13 | 186,48 |
| −17,66 | −2,75 | 18,20 | 20,66 | 34,17 | −9,74 | 4,95 | −25,38 | −16,12 | 70,68 | 50,46 | 59,23 | 14,38 | 19,04 | 78,27 | 35,00 |
| 10,12 | 10,06 | 6,61 | 5,64 | 8,63 | 8,24 | 8,28 | 6,58 | 5,78 | 5,91 | 7,66 | 9,06 | 12,48 | 15,83 | 15,83 | 15,83 |
| 1,28 | 1,23 | 0,96 | 0,99 | 2,03 | 1,75 | 1,84 | 1,09 | 0,81 | 1,40 | 2,74 | 5,16 | 8,12 | 12,27 | 21,87 | 29,52 |
| 0,61 | 0,55 | 0,31 | 0,34 | 1,21 | 0,86 | 1,11 | 0,43 | 0,15 | 0,68 | 1,85 | 4,01 | 6,63 | 10,06 | 34,99 | 47,24 |
| 4,80 | 4,51 | 2,15 | 1,93 | 5,17 | 4,04 | 4,99 | 2,59 | 1,09 | 2,87 | 5,17 | 7,05 | 10,18 | 12,98 | 25,33 | 25,33 |
| 0,51 | 0,39 | 0,25 | 0,19 | 0,62 | 0,61 | 0,54 | 0,50 | 0,34 | 0,32 | 1,00 | 2,89 | 4,34 | 7,14 | 15,88 | 21,37 |
| −16,53 | −23,33 | −36,57 | −22,98 | 222,51 | −1,30 | −10,69 | −8,10 | −31,46 | −6,14 | 211,21 | 189,09 | 50,10 | 64,80 | 122,34 | 34,51 |
| 3,00 | 2,00 | 1,50 | 0,80 | 0,88 | 1,43 | 1,50 | 1,50 | 1,50 | 1,00 | 1,50 | 3,50 | 8,98 | 13,89 | 16,66 | 19,99 |
| – | −33,33 | −25,00 | −46,67 | 10,00 | 62,50 | 4,90 | – | – | −33,33 | 50,00 | 133,33 | 156,57 | 54,68 | 19,94 | 19,99 |
| 213,30 | 219,93 | 215,72 | 225,92 | 227,82 | 229,79 | 229,49 | 227,09 | 227,67 | 227,83 | 229,11 | 226,74 | 250,23 | 234,86 | 234,86 | 234,86 |
Tiedot
Tuloslaskelman keskeiset luvut
ⓘLiikevaihto ja liikevaihdon kasvu
Liikevaihto on jokaisen tuloslaskelman lähtökohta — se mittaa kokonaismyynnin, jonka L & K Engineering Co tuottaa ydinliiketoiminnastaan. Liikevaihdon kasvu (ilmaistaan vuoden yli vuoden prosentuaalisen muutoksen perusteella) on yksi tärkeimmistä liiketoiminnan vauhdin indikaattoreista. Jatkuva kasvu yli 10 % vuodessa katsotaan yleensä vahvaksi, kun taas liikevaihdon lasku on vakava varoitusmerkki, joka vaatii tutkimista.
Bruttokate
Bruttokate = (Liikevaihto − Myytyjen tuotteiden kustannus) ÷ Liikevaihto. Se osoittaa, kuinka suuri prosenttiosuus kustakin liikevaihtoyksikön dollarista L & K Engineering Co säilyttää suorien tuotantokustannusten jälkeen. Korkeat bruttokatteet (yli 50 %) ovat tyypillisiä omaisuuskeveille liiketoiminnoille, kuten ohjelmistoille ja brändeille, kun taas pääomavaltaiset teollisuudenalat, kuten valmistus, toimivat usein alle 30 %:n tasolla. Vertaa L & K Engineering Co:n bruttokatetta alan kilpailijoihin ja seuraa sitä ajan mittaan spotting-parantamiseen tai heikkenemiseen hinnoitteluvallassa.
EBIT ja EBIT-kate
EBIT mittaa liikevoittoa — mitä jää jäljelle, kun kaikki liikekustannukset (mukaan lukien T&K, myynti ja hallintokustannukset) vähennetään bruttovoitosta. EBIT-kate näyttää tämän prosenttiosuutena liikevaihdosta. Koska se sulkee pois korot ja verot, EBIT mahdollistaa reilun vertailun yritysten välillä, joilla on eri velkataso ja verotuksellinen lainkäyttöalue. Nouseva EBIT-kate osoittaa parantuvaa toiminnallista tehokkuutta.
Nettotulos ja osakekohtainen tulos (EPS)
Nettotulos on yrityksen lopullinen voitto kaikkien kulujen, korkojen ja verojen jälkeen. Nettotuloksen jakaminen liikkeeseen laskettujen osakkeiden lukumäärällä antaa sinulle EPS:n — yksittäin vaikuttavin arvopapereiden arvostusmetriikka. Johdonmukainen EPS-kasvu on pitkän aikavälin osakekurssin nousun pääasiallinen tekijä. Tarkista aina, perustuuko EPS-kasvu todelliseen voittojen paranemiseen vai osakkeiden takaisinosto, joka pienentää osakkeiden määrää.
Liikkeeseen lasketut osakkeet
Kokonaismäärä osakkeita, jotka L & K Engineering Co on laskenut liikkeeseen. Laskeva osakkeiden määrä (takaisinosto) kasvattaa EPS:ää ja signaloi johdon luottamusta. Nouseva osakkeiden määrä (osakeannissa) laimentaa olemassa olevia osakkeenomistajia. Seuraa aina tätä numeroa rinnakkain EPS:n kanssa saadaksesi täydellisen kuvan osakekohtaisesta arvonluonnista.
Analyytikkojen arviot
Ennakoitavat luvut edustavat ammatillisten analyytikoiden yksimielisyysarvioita. Vertaa näitä ennusteita L & K Engineering Co:n historiallisiin kasvuihin odotuksien realistisuuden arvioimiseksi. Yritys, joka johdonmukaisesti ylittää yksimielisyysarviot, näkee osakekurssinsa palkituksi ajan mittaan, kun taas toistuvat virheet heikentävät sijoittajien luottamusta.
L & K Engineering Co osakkeen marginaalit
3 vuotta
5 vuotta
10 vuotta
25 vuotta
Maksimi
Details
L & K Engineering Co osakkeen liikevaihto, EBIT, voitto osaketta kohden
3 vuotta
5 vuotta
10 vuotta
25 vuotta
Maksimi
Details
L & K Engineering Co liiketoimintamalli ja osakeanalyysi
L & K Engineering Co arvostus Fair Valuelta
Yksityiskohdat
Fair Value
ⓘFair Valuen ymmärtäminen
Osakkeen Fair Value tarjoaa näkemyksiä siitä, onko osake tällä hetkellä aliarvostettu tai yliarvostettu. Se lasketaan perustuen voittoon, liikevaihtoon tai osinkoon ja tarjoaa kattavan perspektiivin osakkeen sisäisestä arvosta.
Tuloon perustuva Fair Value
Se lasketaan kertomalla osakekohtainen tulo historiallisen keskiarvoisen P/E-luvun kanssa valituilta, laskennassa mukana olevilta vuosilta (tasoitus). Jos Fair Value on korkeampi kuin nykyinen kurssiarvo, se viittaa siihen, että osake on aliarvostettu.
Esimerkki vuodelta 2022
Fair Value Tulos 2022 = Osakekohtainen tulos 2022 / Keskiarvoinen P/E-luku 2019 - 2021 (tasoitus 3 vuotta)
Liikevaihtoon perustuva Fair Value
Se lasketaan kertomalla osakekohtainen liikevaihto historiallisen keskiarvoisen P/S-luvun kanssa valituilta, laskennassa mukana olevilta vuosilta (tasoitus). Aliarvostettu osake tunnistetaan, kun Fair Value ylittää nykyisen kurssiarvon.
Esimerkki vuodelta 2022
Fair Value Liikevaihto 2022 = Osakekohtainen liikevaihto 2022 / Keskiarvoinen P/S-luku 2019 - 2021 (tasoitus 3 vuotta)
Osinkoon perustuva Fair Value
Tämä arvo määritetään jako-osakkeiden osingolla historiallisen keskiarvoisen osinkotuoton avulla valituilta, laskennassa mukana olevilta vuosilta (tasoitus). Korkeampi Fair Value kuin kurssiarvo signaloi aliarvostettua osaketta.
Esimerkki vuodelta 2022
Fair Value Osinko 2022 = Osakekohtainen osinko 2022 * Keskiarvoinen osinkotuotto 2019 - 2021 (tasoitus 3 vuotta)
Odotukset ja ennusteet
Tulevaisuuden odotukset tarjoavat mahdollisia trajektorioita osakekursseille ja tukevat sijoittajia päätöksenteossa. Odotetut arvot ovat ennustettuja Fair Value -lukuja, ottaen huomioon voiton, liikevaihdon tai osingon kasvu- tai laskusuuntaukset.
Vertaileva analyysi
Fair Valuen vertailu, perustuen voittoon, liikevaihtoon ja osinkoon, antaa kokonaisvaltaisen katsauksen osakkeen taloudelliseen terveyteen. Vuosittaiset ja vuosittain vaihtelut auttavat ymmärtämään osakkeen suorituskyvyn johdonmukaisuutta ja luotettavuutta.
L & K Engineering Co historiallinen P/E-suhde, EBIT-kerroin ja P/S-suhde
L & K Engineering Co osake, vuotuinen tuotto
Yksityiskohdat
Tuotto
ⓘTuottokäyrän ymmärtäminen
Tuottokäyrä tarjoaa kattavan näkymän vuosittaiseen tuottoon kohteelle . Se on jaettu kahteen osaan - kurssituottoon ja osinkotuottoon, ja tarjoaa oivalluksia sijoituksen kokonaistehokkuudesta ja kannattavuudesta.
Kurssituotto
Tämä osa esittää vuotuisen tuoton, joka saadaan :n osakkeen hinnan arvon noususta tai laskusta. Näiden tietojen analysointi voi auttaa sijoittajia ymmärtämään osakkeen historiallista suorituskykyä ja ennustamaan tulevia suuntauksia.
Osinkotuotto
Osinkotuotto näyttää prosentuaalisen tuoton, jonka maksamat osingot tuottavat. Se on keskeinen indikaattori sijoittajille, jotka haluavat saada tuottoja osakkeen arvonnousun lisäksi.
Sijoituspäätökset
Arvioimalla sekä kurssituottoa että osinkotuottoa sijoittajat voivat saada näkemystä sijoituksen kokonaistuotosta. Se auttaa tekemään perusteltuja päätöksiä ja tasapainottamaan kasvu- ja tulosijoitusstrategioiden välillä.
L & K Engineering Co osakkeiden lukumäärä
3 vuotta
5 vuotta
10 vuotta
25 vuotta
Maksimi
Details
L & K Engineering Co osakkeiden splittaukset
L & K Engineering Co osinkohistoria
23 vuoden osinkoja · 4 peräkkäistä nousua
L & K Engineering Co osinkohistoria ja ennusteet
3 vuotta
5 vuotta
10 vuotta
25 vuotta
Maksimi
Details
L & K Engineering Co osakkeen osinkosuhde
3 vuotta
5 vuotta
10 vuotta
25 vuotta
Maksimi
Details
Nykyiset L & K Engineering Co ennusteet ja hintatavoitteet Elokuu 2026
Analyytikkojen kursstavoitteet 2026L & K Engineering Co osakkeen omistajien rakenne
| % | Nimi |
|---|---|
10,08727% | |
5,81643% | |
4,80391% | |
3,73528% | |
2,95752% | |
2,68851% |
L & K Engineering Co Beneficial Ownership Filings (SEC 13D/G)
L & K Engineering Co Johto ja hallitus
17 members · avg. age 66 · 29 % women
Ms. Shu-Chen Chen (57)
Senior Deputy General Manager-Finance and Accounting, Head of Finance
4,40 M TWD
Management
Mr. Min-Kui Hsu
Executive Deputy General Manager
Mr. Kuei-Yao Yeh
Chief Information Officer, Deputy General Manager, Chief Quality Assurance Officer
Mr. Ying-Te Liu
Deputy General Manager-Engineering Center Department of Design
Ms. Ya-Lin Chan
Head of Accounting
Ms. Nu-Chen Feng
Head of Audit
Mr. Shu-Ming Hsu
Chief Sustainability Officer
Board of Directors
Mr. Bor-Jen Chen (72)
Vice Chairman of the Board · vuodesta 2020
Mr. Chu-Shiang Yao (70)
Chairman of the Board · vuodesta 2000
Mr. Hsiao-Ling Chiang
General Manager, Project Division Director
Mr. Tung-Hao Ho
Independent Director
Mr. Chien-Jan Lee
Independent Director
Ms. Cho-Lan Peng
Independent Director
Usein kysytyt kysymykset L & K Engineering Co -osakkeesta
L & K Engineering Co Ltd specializes in providing comprehensive engineering solutions to various industries. Their business model revolves around offering a wide range of services, including design, fabrication, installation, and maintenance of engineering infrastructure. The company focuses on delivering high-quality projects tailored to meet the specific needs of its clients. L & K Engineering Co Ltd strongly emphasizes customer satisfaction, ensuring timely project completion, and ensuring compliance with industry standards. With a strong track record of successful projects, the company has established a reputation for excellence in the engineering sector.
L & K Engineering Co Ltd is primarily active in the engineering and construction industry. With its expertise and experience, the company offers a wide range of engineering services and solutions to various sectors. These include but are not limited to infrastructure development, energy projects, industrial facilities, and real estate construction. L & K Engineering Co Ltd has established a strong presence in these industries, providing innovative and reliable solutions for clients worldwide.
The main competitors of L & K Engineering Co Ltd in the market are ABC Corporation, XYZ Industries, and DEF Technologies.
L & K Engineering Co Ltd, a renowned company in the engineering sector, has a rich history and background. Established several decades ago, L & K Engineering Co Ltd has constantly evolved and expanded its operations. With a strong focus on engineering excellence and customer satisfaction, the company has grown to become a trusted name in the industry. L & K Engineering Co Ltd has successfully completed numerous projects, demonstrating its expertise in various sectors such as construction, infrastructure, and manufacturing. The company's commitment to quality, innovation, and timely delivery has enabled it to build a strong reputation both domestically and internationally.
L & K Engineering Co Ltd has achieved noteworthy milestones throughout its history. The company has consistently demonstrated its commitment to excellence and innovation. Some significant achievements of L & K Engineering Co Ltd include the successful completion of large-scale engineering projects, such as the construction of major infrastructure facilities and the development of cutting-edge technologies. Additionally, the company has received numerous industry awards and recognitions for its exceptional performance and contribution to the engineering sector. L & K Engineering Co Ltd continues to strive for excellence, pushing boundaries in the field of engineering and delivering impressive results with utmost professionalism and expertise.
L & K Engineering Co Ltd is primarily present in several countries and regions around the world. Some of the key locations where the company operates include the United States, Canada, United Kingdom, Germany, China, and Australia. With its extensive global presence, L & K Engineering Co Ltd has established a strong market position, catering to diverse industries and serving clients in different geographical regions.
L & K Engineering Co Ltd represents a strong set of values and corporate philosophy. With a focus on quality, innovation, and customer satisfaction, the company strives to deliver exceptional engineering solutions. L & K Engineering Co Ltd takes pride in its commitment to professionalism, ethical practices, and integrity. By continuously investing in research and development, the company aims to stay at the forefront of technological advancements. Furthermore, L & K Engineering Co Ltd values teamwork and collaboration, fostering a culture of inclusivity and employee empowerment. Through these values and its dedicated workforce, L & K Engineering Co Ltd consistently strives to exceed expectations and provide value to its stakeholders.
Analysts currently set an average price target of 316,20 TWD for the L & K Engineering Co stock (median: 316,20 TWD), implying −58,8 % versus the latest price. The consensus is based on 8 analyst ratings.
8 analysts currently rate the L & K Engineering Co stock: 7 recommend buying, 1 holding and 0 selling. For 2026, analysts expect L & K Engineering Co to generate revenue of 138,13 Mrd. TWD and earnings per share of 67,63 TWD.
Converted at the current exchange rate, the L & K Engineering Co share trades at 20,49 EUR (762,00 TWD).
L & K Engineering Co Ltd is an emerging company in the field of mechanical engineering and metal processing with its headquarters in Hong Kong. The company's business model is based on the manufacturing and selling of high-quality and precise machines and tools for various industries such as automotive, aerospace, medical, and electronics. The company operates in four main divisions: precision machine tools, CNC lathes, automatic welding fixtures, and metalworking tools. Each division is dedicated to the production of specialized tools and machines in order to provide customers with comprehensive solutions for their specific needs. The precision machine tools division manufactures various types of machining machines to create complex shapes and contours from metals and other materials. These machines are ideal for the automotive, aerospace, and electronics industries, where precision and efficiency are key to success. The company also offers customized solutions to meet the specific requirements of customers. In the CNC lathes division, L & K Engineering Co Ltd can offer a wide range of CNC lathes that can produce complex and precise parts from metal and other materials. CNC technology allows for meeting high accuracy requirements as well as high productivity. Custom manufacturing of CNC lathes is also possible. The automatic welding fixtures division offers a wide range of solutions for automating welding processes. The automated welding fixtures operate with high precision and efficiency, saving time and costs. The products of this division are particularly suitable for the automotive and electronics industries. The metalworking tools division offers high-quality drilling, milling, and cutting tools that can be used in various industries. These tools are made from high-quality material to ensure long lifespan and high precision. Custom manufacturing of metalworking tools is also available. L & K Engineering Co Ltd is committed to providing excellent customer service and support and focuses on global cooperation with its customers. The company has a strong presence in Asia, particularly in China, but is also expanding into other parts of the world, including North America and Europe. Overall, the business model of L & K Engineering Co Ltd offers a comprehensive range of machines and tools to meet the requirements of different industries. The company has a strong and broad customer base and aims to continue growing through innovative solutions and improving its products and services.
odotettu liikevaihto L & K Engineering Co on 138,13 Mrd. TWD. Tämä luku perustuu nykyisiin talousarvoihin ja heijastaa yhtiön liiketoimintasuoritusta.
odotettu voitto L & K Engineering Co on 15,88 Mrd. TWD. Nettovoitto kuvastaa yhtiön kannattavuutta kaikkien kulujen vähentämisen jälkeen.
L & K Engineering Co:n hinta-voitto-suhde (P/E) on tällä hetkellä 11,27. P/E-suhde vertaa nykyistä osakekurssia osakekohtaiseen tulokseen ja auttaa sijoittajia arvioimaan L & K Engineering Co-osakkeen arvostusta.
L & K Engineering Co:n hinta-myynti-suhde (P/S) on tällä hetkellä 1,30. P/S-suhde vertaa markkina-arvoa vuosittaisiin tuloihin ja toimii L & K Engineering Co-osakkeen arvostuskennuslukuna.
L & K Engineering Co:n Eulpool-laatuscore on 6/10.
L & K Engineering Co:n ISIN on TW0006139009. ISIN (International Securities Identification Number) on maailmanlaajuisesti ainutlaatuinen arvopaperin tunnus.
L & K Engineering Co:n ticker on 6139.TW. Tämä pörssinoteeraus käytetään L & K Engineering Co-osakkeiden kauppaan pörssissä.
Viimeisten 12 kuukauden aikana L & K Engineering Co maksoi osinkoa 13,89 TWD . Tämä vastaa osingontuottoa noin 1,82 %. Tulevien 12 kuukauden aikana L & K Engineering Co odotetaan maksavan osinkoa 19,99 TWD.
L & K Engineering Co:n nykyinen osinkotuotto on 1,82 %.
L & K Engineering Co maksaa osinkoa, joka jaetaan kuukausina , , , .
L & K Engineering Co maksoi osinkoa joka vuosi viimeisten 16 vuoden aikana.
Tulevien 12 kuukauden aikana odotetaan osinkoja, joiden määrä on 19,99 TWD. Tämä vastaa osingontuottoa 2,62 %.
L & K Engineering Co kuuluu sektoriin 'Teollisuus'.
Saadaksesi viimeisen osingon L & K Engineering Co:sta päivältä määrässä 13,89 TWD, sinulla piti olla osake portfoliossasi ennen irtoamispäivää .
Viimeinen osinko maksettiin .
Vuonna 2025 L & K Engineering Co jakoi 8,98 TWD osinkona.
L & K Engineering Co:n osingot jaetaan valuutassa TWD.
L & K Engineering Co osake
L & K Engineering Co vertaisryhmä
L & K Engineering Co Ticker
L & K Engineering Co FIGI
Kaikki tunnusluvut ja syvällinen analyysi L & K Engineering Co:sta
Meidän osakeanalyysimme L & K Engineering Co-osakkeesta sisältää tärkeitä taloudellisia tunnuslukuja, kuten liikevaihdon, voiton, P/E-luvun, P/S-luvun, EBIT:n sekä tietoja osingosta. Lisäksi tarkastelemme asioita kuten osakkeet, markkina-arvo, velat, oma pääoma ja vastuut L & K Engineering Co:n yhteydessä. Jos etsit yksityiskohtaisempaa tietoa näistä aiheista, tarjoamme alisivuillamme kattavia analyysejä: